15% discount when you spend over €100 on tiles
Monestir Wet Effect Protector Anti-stain protector, transparent.
Specially designed for Encaustic Cement tiles.
1 liter to treat about 5 - 7 m2
For internal or external use.
Product specially designed to treat and protect hydraulic cement tiles. It acts protecting your floor from any type of domestic stains. Enhance the natural beauty of the floor and produces a satin wet effect. It prevents your tiles from salt efflorescence and moisture stains formations.
Nourishes the tiles and gives them a soft touch effect. Makes regular cleaning and maintenance easier. Helps prevent the floor from premature wearing and aging. It goes deep into the surface, so it does not form film layers.
Not yellowing or aging with time passing. It penetrates the material pores allowing air to pass so it lets the tiles breathe and dries fast.
Apply pure, do not dilute. Apply on at open air on a previously brushed floor, perfectly clean and completely dry. Shake well the product before use and serve on a clean recipient. Apply with a roller special for enamel, spread constantly and uniformly until covering the whole surface. Avoid using too much product. In case of using too much product, retire the excess with a clean cloth before it dries. After applying one coat, wait at least 1 hour to apply a second one. The product dries immediately at touch but it is not convenient to step on it right away; it will be fully effective once 24 hours have passed.
Very flammable liquids and vapors. May be fatal if swallowed and enters the respiratory tract. Harmful in contact with skin or if inhaled. Causes skin irritation. Causes severe eye irritation. It is suspected that it damages the fetus. Keep out of the reach of children. Keep away from sources of heat, sparks, open flame or hot surfaces.- Do not smoke. IF SWALLOWED: Call a POISON CENTER or doctor. Rinse mouth. If medical advice is needed, have the container or label on hand. IF ON SKIN (or hair): Remove contaminated clothing immediately. Clear your skin with water or shower. IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Keep clarifying. Remove contaminated clothing and wash before reuse. Do not eat. RESTRICTED TO PROFESSIONAL USES. Safety data sheet available for professional user on request. IN CASE OF ACCIDENT CONSULT TO THE MEDICAL TOXICOLOGICAL INFORMATION SERVICE.
Component Concentration range. Xylene> 30% Toluene 5% ≤ c <15%